There is meaning in the 90% of the metal that is shaved away.
ZENITH putter heads are precisely machined from a stainless steel block weighing approximately 4 kg.
The finished head weighs approximately 350 g. In other words, we create a single putter head while removing over 90% of the material's weight.
This time, we will talk about the manufacturing process behind this large weight difference and the design commitment reflected in where the metal is shaved and where it is left.
Looking only at the numbers, it seems like simple subtraction, but inside it is packed with a strong commitment to precision and design.
Over 90% is shaved away
When producing a 350 g head from an approximately 4 kg stainless steel block, the weight remaining as the finished head is approximately 9% of the total material.
The remaining approximately 91% corresponds to the parts removed through machining.
From this large weight difference, you can understand the characteristics of machining, where a block of metal is gradually shaved and finished into the desired shape.
Machining is a manufacturing method where a metal material larger than the finished product is prepared, and the shape is created while removing unnecessary parts.
Therefore, the amount of material used and the machining time may increase.
Even so, the reason ZENITH is particular about machining is that it has the appeal of being able to finely create the head shape, detailed molding, and weight distribution according to the design.

Shaping step by step from rough machining to finishing
The process begins with rough machining to shave out the general shape, and then proceeds through the necessary steps to finishing machining.
Rather than machining to the final shape all at once, by dividing the steps according to the part to be machined and the amount of cutting, we create the shape while considering the load on the tools and machining precision.
Also, because deformation may occur due to residual stress inside the material during the process of removing a large amount of metal, care is also required for the machining order and the method of fixing the material.
In this process, details unique to machining, such as the roundness of the flange and the soft lines of the toe, gradually reveal themselves.
There is a design intention in where to shave and what to leave
In machining, it is not just about removing metal, but the design of which part to leave the weight is also important.
Depending on the head shape, wall thickness, and weight distribution, characteristics such as the center of gravity position and moment of inertia change.
Also, various factors such as the material, face shape, and milling condition are related to the feel of the shot.
At ZENITH, we pursue craftsmanship to realize the characteristics desired in the head by precisely machining the designed shape.

Creating weight distribution through machining
The weight and center of gravity position of the putter head change depending on the head shape, wall thickness, and weight distribution.
For example, the weight distribution between the toe side and the heel side, and the thickness of the sole part are important elements when considering the design of the head.
In machining, these shapes can be considered from the design stage, and the head can be created while leaving the necessary parts.
However, the overall feel of the putter changes not only with the head weight, but also with the shaft length and weight, and the balance with the grip.
At ZENITH, we pursue specifications that suit each individual while considering the design of the head and the overall balance of the putter.
This is the point
Machining the head from a metal block:
When producing a 350 g head from approximately 4 kg of material, approximately 91% of the material weight is removed through machining.
Dividing the process and machining precisely:
From rough machining to finishing machining, we approach the designed shape while switching tools and machining conditions.
Where to shave and what to leave is important:
The head shape and weight distribution are related to characteristics such as the center of gravity position and moment of inertia.
The machining technology poured into a single head
From an approximately 4 kg metal block to an approximately 350 g putter head.
Behind that large change is the technology cultivated in metal machining and the design thought through to the smallest detail.
Not just shaving metal, but leaving the necessary parts and finishing it into the desired shape.
At ZENITH, we pursue precision craftsmanship while valuing the process from a stainless steel block to the birth of a single putter.
The value of design and machining technology lies not in the amount of metal shaved away, but in the shape that remains at the end.
That is ZENITH PUTTER's commitment to machining.