ZENITH Manufacturing Process

ZENITHの製造工程とは?削り出しパターが完成するまでを解説

Turning fitting data into a single milled club.

How do the measurements derived from a fitting become a single club through various manufacturing processes?
This time, we will talk about ZENITH's manufacturing process.

The defining feature of ZENITH's manufacturing is that each process, from measurement to finishing, is seamlessly connected.

Turning fitting data into design data

Specifications derived from the fitting—such as length, lie angle, loft angle, neck position, material, and milling—can be compiled directly into a design model.
This model becomes the standard for all subsequent processes.

The more accurate this design model is, the more faithful the milled club will be to the specifications determined during the fitting.

Creating a machining program for each club

While mass-produced products use the same machining program repeatedly, ZENITH creates a new machining program for each set of design data.
Manufacturing begins by instructing the machining center to perform movements designed exclusively for that one club.

Although it is a labor-intensive method, creating a program for each club is what makes the option of a fully custom club a reality.

Milling a 350g head from a 4kg ingot

The starting point for the head is a metal ingot weighing approximately 4kg.
It is gradually milled by the machining center until it is finished as a head weighing approximately 350g.
It is an extravagant manufacturing method where far more material is removed than remains.

Supporting this process is the metalworking technology cultivated through the machining of aerospace components.

Performing everything from finishing to assembly in-house

After milling is complete, the head is combined with the shaft and grip and finished to the length determined during the fitting.

Measurement, design, milling, finishing, assembly.
The defining feature of ZENITH's manufacturing process is that this entire sequence is seamlessly connected.

Key points

Fitting data becomes the design model:
This model becomes the standard for all subsequent processes.

Creating a new machining program for each club:
It begins by instructing the machining center to perform movements designed exclusively for that one club.

Milling a 350g head from a 4kg ingot:
It is gradually milled by the machining center.

Performing everything from finishing to assembly in-house:
The process from measurement to assembly is seamlessly connected.

The connection between processes creates the precision of a single club

The value of ZENITH's manufacturing process lies not in any single process being superior, but in the connection itself, from measurement to assembly.