Offset: An element that changes both the position of the hands and the face angle.
The neck of a putter has not only its bend and length, but also an element called offset.
This time, we will talk about how differences in offset affect the stroke and impact.
What is offset?
Offset is a design that indicates how far back the leading edge of the face is set relative to the shaft axis.
It can also be described as the degree to which the hands appear ahead of the face when addressing the ball.
The amount of offset varies greatly depending on the shape of the neck, and necks with more pronounced bends, such as crank necks, tend to have greater offset.
From the front, offset changes the position of the hands
The effect of offset is easier to understand when viewed from the front, or from the target line.
When the face is set back relative to the shaft axis, it means that at the moment of impact, the shaft and hands have already passed the ball.
In other words, an offset design creates a condition closer to a hand-first position, where the hands are ahead of the face at impact, through its very structure.

The amount of offset determines how far ahead the hands are
The degree to which the hands are ahead of the face varies depending on the amount of offset.
Putters with greater offset result in the hands being further ahead of the ball at impact, while putters with less offset result in less advancement.
This difference is not merely a structural feature; it also affects the actual quality of the stroke and impact.
Another factor affecting dynamic loft
As discussed in a previous article, dynamic loft changes depending on the position of the hands at impact, and in a hand-first position where the hands are ahead, the effective loft angle is smaller than the static loft angle.
Offset is an element that structurally creates this advancement of the hands.
In other words, the amount of offset itself can be considered one of the hidden factors that affects dynamic loft at impact.
At the same time, this advancement of the hands also necessitates adjusting the stroke itself to match it.
The stroke arc and the timing of the face angle
There are two types of putting strokes: straight strokes, which pull and push straight, and arc strokes, which move in a curved path.
In an arc stroke, the face naturally opens during the backswing and closes toward impact.
Offset is closely related to the timing of this opening and closing.
With the right amount of offset, even an arc stroke can more easily return the face to a straight position at the moment of impact.
What happens when the offset is incorrect
If the offset is excessive or insufficient for your stroke arc, the face angle at impact will deviate from the intended direction.
If you impact with the face open, the ball will start to the right; if it is closed, it will start to the left.
In other words, left-right start-line deviations are not directly caused by the offset itself, but rather by the face angle becoming misaligned at impact because the offset and the stroke arc are not properly matched.

Key points
Offset is the distance the face is set back relative to the shaft axis:
This amount varies greatly depending on the shape of the neck.
From the front, it is a design that creates the advancement of the hands:
It creates a condition closer to hand-first, where the hands pass the ball at impact.
The advancement of the hands affects dynamic loft:
The amount of offset affects the loft angle that comes into play at impact.
An offset mismatch causes left-right start-line deviations:
If it is not properly matched with the stroke arc, the face angle at impact will become misaligned.
Offset is also an element to be determined during fitting
Offset is a multifaceted element that affects not only the timing of the face angle, but also the position of the hands and dynamic loft.
At ZENITH, we use fitting to determine the optimal putter for you, including the amount of offset that suits your stroke type.
Knowing what kind of arc your stroke makes and how far ahead your hands are is the first step in choosing the right offset.