The Two Stainless Steel Materials Chosen by ZENITH PUTTER — What Are the Differences Between SUS303P and JPS?

TECHNOLOGY / MATERIAL

Putter Milled from a Single Ingot


The head, including the neck, is milled from a single ingot.
Rather than welding parts together, this one-piece construction ensures that weight and balance remain consistent,
achieving the exact specifications intended in the design.
Precision machining by a machining center makes it possible to finish even delicate lines,
such as the flange shape and toe area,
beautifully and functionally.
The milling applied to the face is not only an aesthetic design element,
but also a technique to bring out the characteristics of the "material" introduced next.


SUS303P (Premium Stainless Steel)


SUS303, widely used in milled putters, has been subjected to a proprietary heat treatment.
Transformed into a high-density, high-strength material, it achieves a new feel at impact:
"The sensation of striking off a solid surface, yet feeling soft."


JPS (Japan Premium Stainless Steel)


Rather than basing it on existing standards, this is a top-tier material created from scratch through repeated formulation and testing
in collaboration with domestic metal manufacturers.
In addition to its unique chromium and nickel content, the combination of a certain component
gives it excellent corrosion resistance along with high density and high strength.
It is not a matter of one being superior to the other, but rather two options designed to be chosen
according to the desired feel and sound, and the player's preference.
The differences in sound and feel created by the combination of material and milling
also affect compatibility with the ball's dimples and help reduce lateral deviation at impact.

Reasons for Adoption

ZENITH is not originally a golf manufacturer, but a metalworking company (Japan Geonic) that produces aerospace components.
In other words, it was not that they "acquired machining technology because they wanted to make putters," but rather that "they already had high-precision machining technology, and entered the putter market as a product that could make use of that technology."
The manufacturing method of machining from an ingot is a direct application of the technology cultivated in the production of aerospace components.

Differences in Feel and Sound

Some putters are manufactured by making the face, neck, and head body separately and welding them together,
but this method can lead to slight variations in weight distribution.

Milling the head in one piece from an ingot ensures "precise, design-specified measurements" because there are no seams,
making it a logical choice for a product that prides itself on feel, sound, and accuracy.
When the feel and sound are "satisfying," you will hesitate less during your stroke, which ultimately improves stroke consistency.

Impact on Performance

The uniform weight distribution achieved through one-piece machining and the consistent feel of each strike provided by the material's hardness lead to greater reproducibility, ensuring that striking with the same force consistently covers the same distance.

Differences in Manufacturing Methods

Casting (Cast)


A manufacturing method where the material is melted and poured into a mold to form a shape. Suitable for mass production and low-cost.
However, it is prone to slight density variations inside due to shrinkage during cooling.
Forging (Forged)
The metal is hammered or extruded to densify its structure before forming. The internal crystalline structure becomes dense,
and it is said to result in a softer striking feel. Suitable for mass production, but not ideal for small batches of diverse products. Difficult to create complex internal shapes.


Machining (Milled)


A manufacturing method where a block of material is carved into shape. It involves many manual processes, and each piece requires careful attention to detail.
Because it uses rolled material with a uniform internal structure, it is less likely to have density variations like cast or forged products,
and its advantage is that there are fewer uncertain factors. The method adopted by ZENITH


Carbon Steel (Mild Steel)


When machined putters first emerged, most were made of mild steel. It is characterized by a soft striking feel, but
it has the weakness that iron rusts, so some form of surface treatment is necessary.


Stainless Steel (303 Series)


Excellent corrosion resistance, and tends to have a slightly firmer striking feel than mild steel. ZENITH's SUS303P and JPS also belong to this category.

About Machining from Solid

Machining a part, including the neck, from a solid block means, in other words, that metal with several times the volume of the finished product is
"discarded" through cutting. Because of the significant loss in material costs and longer processing times, production efficiency is lower compared to casting or forging.


By using multi-axis (5-axis, etc.) machining centers developed through precision parts manufacturing, complex shapes can be finished in a single setup, minimizing cumulative errors. This approach is a logical design choice for ZENITH, which prides itself on precision.

Putter Manufacturing Process

① Material Measurement + Drilling Measure the height, width, length, and weight to calculate the material's specific gravity.

② Step 1 After setting the material in the 5-axis machining center, use a measuring device to align the X-axis.
After machining: measure the crank → hosel diameter and bend → tip diameter with the measuring device, and adjust the dimensions to 1/100th of a unit.

③ Step 2 Set the vise in the 5-axis machining center and set up using jigs tailored to each model.
Use a measuring device to align the
side XY-axis and top XY-axis.

④ Finishing
⑤ Polishing
⑥ Coloring
⑦ Assembly

Terminology

303P (303 premium)


SUS303 subjected to a proprietary heat treatment. "P" stands for premium, and
it is not the official name under JIS standards, but ZENITH's unique branding.


JPS (Japan Premium Stainless)


A proprietary stainless steel material with a unique composition jointly developed by ZENITH and a domestic metal manufacturer.
It is not based on existing JIS standards, but is a proprietary trademarked material name developed by ZENITH with independently adjusted chromium and nickel content.